Hi Tiago,

Thanks for this.

Unfortunately my machine seems to fail with calling state.draw() for interactive visualisation which makes it difficult to understand exactly how this interacts. I am running it from the docker image, on macOS 10.14.16.

Following your instructions on installation page;

docker pull tiagopeixoto/graph-tool xhost +local: docker run -ti -u user -w /home/user --rm -e DISPLAY=$DISPLAY -v /tmp/.X11-unix:/tmp/.X11-unix tiagopeixoto/graph-tool ipython

from graph_tool.all import * ; import graph_tool.all as gt ; Unable to init server: Could not connect: Connection refused (ipython:1): Gdk-CRITICAL **: 12:54:59.581: gdk_cursor_new_for_display: assertion 'GDK_IS_DISPLAY (display)’ failed (ipython:1): Gdk-CRITICAL **: 12:54:59.598: gdk_cursor_new_for_display: assertion 'GDK_IS_DISPLAY (display)’ failed

g = gt.collection.data["celegansneural”] state = gt.minimize_nested_blockmodel_dl(g) state.draw() RuntimeError: Gtk couldn't be initialized. Use Gtk.init_check() if you want to handle this case.

Do you have a suggestion how to resolve this?

I can of course make use of the output function to review what changes are being made, but it still leaves me a little confused of how I can assign hvprop weightings and call upon them with state.draw.

Alternatively, could you kindly provide an example how to make use of the hvprops, add a set of parameters as weights (such as the eigenvector centrality of hierarchical nodes) and assign this as a propertymap for the output? I’m not sure if such an example is available on your repository, but do correct me if I’m wrong..

Appreciate your guidance!

James

On 6 Aug 2019, at 10:42, Tiago de Paula Peixoto tiago@skewed.de wrote:

Am 05.08.19 um 15:09 schrieb Ruffle, James:

...

1. This presumably then needs to be saved as a hvprops(?!). But, I am unclear how to do this, not least in a way that I know for sure that the correct hierarchical vertices within l1state and l2state are aligning to the generated centrality measures of x1 and x2, respectively.

2. Furthermore, if/when that is achieved, how can I call upon this in drawing, for example to size the level 1 hierarchical vertices according to centrality, or level 2 vertices by another measure, etc.?

If you call state.draw() (which calls draw_hierarchy()), it returns, among other things, the hierarchy tree as a graph. The 'hvprops' should be a dictionary with drawing attributes to that graph. It can contain property maps, which do not need to be owned by the hierarchy tree but need to have the same size.

To get the hang of it, you can call state.draw() once to obtain the hierarchy tree, and then pass values to hvprops to see how that affects the layout.

Best, Tiago

-- Tiago de Paula Peixoto tiago@skewed.de

---

graph-tool mailing list graph-tool@skewed.de https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.skew...

Thanks for this. Sorted..!

However, I am still struggling to understand how to call and make use of the hierarchical vertexes and edges after running the nSBM.

state=gt.minimize_nested_blockmodel_dl(g)

I can then pull the levels and calculate their centrality with:

l1state = state.levels[1].g

ee1, x1 = gt.eigenvector(l1state)

But what command do I need to initiate to firstly save this into the property map, and then plot it, e.g. with the l1 level vertices sized proportionate to E.C in state.draw?

(Or I guess, consider a different scenario where I want to attribute value to the hierarchical edges, and then plot that accordingly).

I couldn't see any documentation for this on the website other than that hvprop does exist, but if there was such as an example please do point me to it...?

Thanks again!

James

On 15/08/2019 10:31, Tiago de Paula Peixoto wrote:

Am 07.08.19 um 14:20 schrieb James Ruffle:

Hi Tiago,

Thanks for this.

Unfortunately my machine seems to fail with calling state.draw() for interactive visualisation which makes it difficult to understand exactly how this interacts. I am running it from the docker image, on macOS 10.14.16.

Following your instructions on installation page;

docker pull tiagopeixoto/graph-tool xhost +local: docker run -ti -u user -w /home/user --rm -e DISPLAY=$DISPLAY -v /tmp/.X11-unix:/tmp/.X11-unix tiagopeixoto/graph-tool ipython

from graph_tool.all import * ; import graph_tool.all as gt ; Unable to init server: Could not connect: Connection refused (ipython:1): Gdk-CRITICAL **: 12:54:59.581: gdk_cursor_new_for_display: assertion 'GDK_IS_DISPLAY (display)’ failed (ipython:1): Gdk-CRITICAL **: 12:54:59.598: gdk_cursor_new_for_display: assertion 'GDK_IS_DISPLAY (display)’ failed

g = gt.collection.data["celegansneural”] state = gt.minimize_nested_blockmodel_dl(g) state.draw() RuntimeError: Gtk couldn't be initialized. Use Gtk.init_check() if you want to handle this case.

Do you have a suggestion how to resolve this?

In MacOS I believe you need to have XQuartz installed:

https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fen.lmgtfy....

Best, Tiago

_______________________________________________ graph-tool mailing list graph-tool@skewed.demailto:graph-tool@skewed.de https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.skew...

Hi Peter,

I don't know the answer to your question about Docker and X11. But just in case it's useful, I'll point out that the easiest way to run graph-tool on Mac is probably to use conda or homebrew. Both of those options provide pre-compiled binaries, so installation should (hopefully) be fairly quick and painless.

https://git.skewed.de/count0/graph-tool/-/wikis/installation-instructions#co... https://git.skewed.de/count0/graph-tool/-/wikis/installation-instructions#ho...

If you knew that already and you prefer the Docker container for other reasons, then I'm sorry for this noise.

Best, Stuart

On 4/23/20, 11:46 PM, "graph-tool on behalf of peterhuson" <graph-tool-bounces@skewed.de on behalf of peter@huson.com> wrote:

Hi James,

I'm wondering how you were able to resolve the error from the X server: > Unable to init server: Could not connect: Connection refused

XQuartz is installed, and I know it works because I have been able to forward X applications to it previously using ssh -X. I'm on OSX 10.12 using XQuartz 2.7.11

I followed the instructions running:

xhost +local: docker run -ti -u user -w /home/user --rm -e DISPLAY=$DISPLAY -v /tmp/.X11-unix:/tmp/.X11-unix tiagopeixoto/graph-tool ipython

Would you be able to share how you configured your xhost to accept connections from the docker container?

Thanks for your help. Peter

-- Sent from: https://urldefense.com/v3/__http://main-discussion-list-for-the-graph-tool-p... _______________________________________________ graph-tool mailing list graph-tool@skewed.de https://urldefense.com/v3/__https://lists.skewed.de/mailman/listinfo/graph-t...